The OXVA Xlim Top Fill Cartridges offer a convenient and mess-free vaping experience. These cartridges are designed for use with the OXVA Xlim series devices, including the Xlim, Xlim SE, Xlim SQ, Xlim Pro, and Xlim Go. If you’re new to the OXVA Xlim system, here’s a guide to help you get started with using the OXVA Xlim Top Fill Cartridges:
1.Identifying Your OXVA Xlim Top Fill Cartridges
OXVA Xlim Top Fill Cartridges come in various resistances, ranging from 0.4Ω to 1.2Ω. The resistance refers to the electrical resistance of the heating coil within the cartridge. Lower resistance coils are generally better suited for higher wattage vaping and produce more vapor. Higher resistance coils are ideal for lower wattages and a more MTL (Mouth-To-Lung) vape experience. The recommended wattage range for each coil resistance is usually printed on the side of the cartridge.
2.Filling the OXVA Xlim Top Fill Cartridges
Before using your OXVA Xlim Top Fill Cartridges for the first time, it’s important to prime the coil. Priming involves saturating the coil with e-liquid to prevent burning upon first use. Here’s how to prime your OXVA Xlim Top Fill Cartridges:
- Locate the silicone stopper on the top of the cartridge. Pinch the sides of the stopper and gently lift it up to reveal the fill port.
- Hold the cartridge at an angle and drip your preferred e-liquid along the inner wall of the cartridge, avoiding the center post.
- Add e-liquid until the viewing window on the side of the cartridge is almost full, but avoid overfilling.
- Press the silicone stopper back into place firmly to ensure a leak-proof seal.
- Let the primed cartridge sit for 5-10 minutes to allow the coil to become fully saturated with e-liquid.
3.Attaching the OXVA Xlim Top Fill Cartridges to Your Device
Once your OXVA Xlim Top Fill Cartridges are primed, it’s time to attach them to your OXVA Xlim device.
- Locate the magnetic connection point on the bottom of the cartridge and the top of your OXVA Xlim device.
- Align the magnets and gently insert the cartridge into the device until it clicks into place.
4.Setting the Wattage on Your Device
Most OXVA Xlim devices allow you to adjust the wattage output. As mentioned earlier, the ideal wattage range for your OXVA Xlim Top Fill Cartridges depends on the coil resistance. Consult the manufacturer’s recommendations or the information printed on the cartridge itself to determine the appropriate wattage range. Generally, a lower wattage is recommended for higher resistance coils (e.g., 1.2Ω) and a higher wattage for lower resistance coils (e.g., 0.4Ω). Start at the lower end of the recommended wattage range and gradually increase it to find your personal sweet spot for flavor and vapor production.
5.Taking a Puff from Your OXVA Xlim with Top Fill Cartridges
Once you’ve filled, attached, and adjusted the wattage on your device, you’re ready to take a puff. Simply inhale through the mouthpiece of your OXVA Xlim device. Depending on the coil resistance you’re using, you can either take a MTL puff (similar to smoking a cigarette) or a DTL puff (direct-to-lung) for a larger amount of vapor.
6.Detaching and Refilling the OXVA Xlim Top Fill Cartridges
When your OXVA Xlim Top Fill Cartridges run low on e-liquid, it’s time to refill. Here’s how:
- Gently pull the cartridge out of your OXVA Xlim device by grasping it firmly at the base.
- Follow steps 2-4 from the “Filling the OXVA Xlim Top Fill Cartridges” section to refill your cartridge.
- Replacing the OXVA Xlim Top Fill Cartridges
The lifespan of an OXVA Xlim Top Fill Cartridge will depend on various factors, such as the e-liquid you use, the wattage you vape at, and your personal vaping habits. Generally, you can expect to replace the coil within the cartridge every 1-2 weeks, depending on usage. When the coil starts to burn or the flavor becomes muted, it’s time to replace the entire cartridge.
Conclusion
The OXVA Xlim Top Fill Cartridges offer a convenient and user-friendly vaping experience. With their top fill design, easy coil priming process, and magnetic attachment system, they are perfect for both beginners and experienced vapers alike. By following the methods outlined in this guide, you can ensure you’re getting the most out of your OXVA Xlim Top Fill Cartridges. Remember to choose the right coil resistance for your desired vaping style, prime your coils before first use, and adjust the wattage to find your personal sweet spot for flavor and vapor production. With proper care and maintenance, your OXVA Xlim Top Fill Cartridges will provide you with a satisfying and enjoyable vaping experience.
